MPL Tuningparts we are known as a manufacturer of high quality, bespoke motorcycle parts for the Italian makes of Ducati, Aprilia and MV-Augusta. Anti-Hopping Clutches, Clutch Covers, Clutch Slave Cylinders, Frame Plugs and much more, these are MPL parts for both racing and street applications and are the finest quality. MPL are experts in using the highest quality materials, leading edge design & technology in their modern German production facilities to produce the highest quality, most functional parts.

MPL Anti Hopping Clutch, special vented design for all Ducati Dry Clutch models.

High quality, functional application yet beautiful to look at.

Usually there are two categories of product available from Parts manufacturers. This is not the case with MPL Tuning Parts, 100% of the parts available are practical 'must have' parts that significantly improve the way you can ride and make your bike better looking than the rest. This unique approach enables you to build your bike to be easier to ride, more efficient and distinctive.

For example the MPL Clutch Slave Cylinder makes riding so much easier. The Clutch pull is about 30% lighter and so easy to use. The feel is a great improvement over OEM and it looks so trick and with a range of colours to choose from you can get the visual appeal you are looking for...

The MPL Tuning Products range...

1. ANTI-HOPPING CLUTCH - Initially designed for racing application and now used increasingly on the road, The Anti-Hopping (Slipper) Clutch helps stop the rear wheel from locking when quickly changing to a low gear. Due to weight reduction when compared to OEM Clutch, the bike becomes more agile and easier to turn as well as 'peppy' and responsive. The Eco2 comes with a special Red Pressure Plate with internal ventilation, aluminium stay bolts and an Installation manual. - Models to fit: All Ducati Dry Clutch models except 1098. Fit Titanium version Clutch to1098 and higher performance racing Ducati engines.
   ECO I Slipper Clutch - No Pressure Plate Venting - AUD$1312.
   ECO II Slipper Clutch - Vented Pressure Plate - AUD$1415.
   Titanium Slipper Clutch - Titanium Stay Bolts, parts and vented Pressure Plate - AUD$1648.



2. CLUTCH BASKET - ALUMINIUM. MPL Lightweight Aluminium Clutch baskets are used to replace OEM and noisy baskets. MPL Basket reduces rotating mass by 700 gram thus increasing the agility of the motor. Can be used with OEM Clutch cent re and plates. Choice of Red coating or hardened gray coating.
   Clutch Basket - Aluminium Red - AUD$395.
   Clutch Basket - Hardened surface Gray - AUD$427.



3. CLUTCH BASKET - TITANIUM. Made with 24 Titanium inserts precisely worked into the basket. These Inserts help prevent the Clutch plates from working into the Basket. The Titanium has a strength of about 7000 N/mm so significantly higher distance can be reached before replacement and the 'Rattling' Clutch sound is changed to be a lower note. Can be used with OEM Clutch cent re and plates. For design reasons, the Titanium Clutch ring is bigger and some Clutch covers may not be suitable. All MPL Clutch Covers are suitable.
   Clutch Basket - Titanium insert Model - AUD$642.



4. CLUTCH SLAVE CYLINDER - "This is one of the more significant improvements you can make to your Ducati". Significantly reduce the manual force required to operate the clutch by about 30% and make aching forearms and blown gear shifts a thing of the past. Easy to fit and available in Black, Blue, Silver, Gold or Red. Bolt on for most Ducati models and Aprillia Mille. You will enjoy this improvement so much, try it and see.
   Clutch Slave Cylinder - Choice of Colours - AUD$289.



5. SPRING CAP SET (6).
   6 Clutch Spring Caps with Stainless Screws - Available in Red, Black, Blue, Natural or Gold.
   Spring Cap sets - AUD$94.



6. CLUTCH PRESSURE PLATE - Made from corrosion resistant Aluminium then annodised these Pressure Plates give optimum engagement and are available in a range of colours.
   Clutch Pressure Plate - Standard - AUD$257.
   Clutch Pressure Plate - Standard Machined edges - AUD$257.
   Clutch Pressure Plate - Vented - AUD$257.

MPL Ducati Half Clutch Cover Racing 1 - Weight 100g. Matching Sprocket Cover (right). Available in Black or Natural.

MPL Ducati and MV Agusta Sprocket Carrier - 300g lighter and available in Black or Red.
Sprockets to fit carrier: 36, 37, 38, 39, 40, 41 & 42 Tooth x 520 or 525 Pitch.

1. CLUTCH COVERS- HALF COVER 1 (Racing.) - Weighs 100 gram in Black or Natural with matching Sprocket Cover available - Bolt on for most Ducati models.
   Clutch Half Cover - AUD$209.



2. CLUTCH COVERS- FULL COVER 2 - Weighs 180 gram in Red, Black or Natural with matching Sprocket Cover available - Bolt on for most Ducati models.
   Clutch full Cover - AUD$283.



3. CLUTCH COVERS- FULL COVER WINDOW 2 - Window cover of Polycarbonate allows vision of the clutch, Weighs about 220 gram in Black or Natural - Bolt on for most Ducati models.
   Clutch full Cover with Window - AUD$283.



4. CLUTCH COVERS- FULL COVER 3 - Weighs 100 gram in Black or Natural with matching Sprocket Cover available - Bolt on for most Ducati models.
   Clutch full Cover - AUD$283.



5. SPROCKET COVERS - Milled from solid block (not pressed sheet) these are weight optomised to 75 grams in Red, Black or Natural - Bolt on for most Ducati models.
   Sprocket Cover - AUD$165.



6. SPROCKET CARRIERS - Allowing a fast change of Sprocket and offers a 300 gram weight reduction compared to OEM. Plastic coated bronze bush in the centre, self locking with adaption for lock wire security. Available in Black or Natural - Bolt on for single side swing arm Ducati and MV Agusta models.
   Sprocket Carrier - AUD$345.



7. SPROCKETS FOR CARRIER - Made with hard coated surface for longer wear and with a range from 36 to 42 teeth. These Sprockets are available in 520 or 525 Pitch.
   Sprockets each - AUD$123.
   
   SAVE ON A SPROCKET CARRIER AND 4 SPROCKET SET.
   Sprocket Carrier and 4 Sprockets to fit (37, 38, 39, 40T) - AUD$673.



8. FRAME COVERS (FRAME PLUGS) - A Frame Cover Kit for covering frame ends and engine mounting points. Buy as a Kit with all parts or as individual parts. Uses a Stainless Steel bolt to pull a backing plate against the 'O' ring which restrains the cover in the frame hole and sealing out water. Available in Red, Black, Natural or Gold for most late model Ducati, Aprilia Mille and Tuono.
   Frame Plugs each - AUD$37.

MPL Frame Covers (Frame Plugs) Aprilia Mille, RSV, Falco and Tuono Kits, Ducati 748/916/996/998,
848/1098, Monster S2R/S4R/600/750/900, 749/999, Multistrada and all SS Kits - AUD$37 each Plug.

Sportsbike is the Australian and New Zealand Distributor for MPL Tuning Parts.
Further information and the full range of MPL products can be found at: www.mpl-tuningparts.de.

MPL Clutch Basket available in Red Coating
AUD$395.


MPL Clutch Basket available in Gray Hard Coating - AUD$427.


HIGHEST RECOMENDATION.
Clutch action is so easy and so light with the MPL Clutch Slave Cylinder - AUD$289.


Clutch Slave Cylinder for Ducati 748, 749, 916, 996, 998, 999, 1098, Monster, S2R, S4R, Multistrada and Aprilia Mille. Colour choice: Blue, Gold, Natural, Red and Black.


MPL Clutch Pressure Plate - Standard. Choice of Red, Gold, Blue or Silver - AUD$257.


MPL Clutch Pressure Plate Machined edges, choice of colours - AUD$257.


MPL Clutch Pressure Plate Vented for cooler Clutch, choice of colours - AUD$257.


MPL Ducati Clutch Cover Racing 1 - Colour choice Black or Natural - AUD$209.
Matching Sprocket Cover available
(see image below).




MPL Ducati Clutch Cover 2 - Colour choice Black, Natural or Red - AUD$283.
Matching Sprocket Cover available.


MPL Ducati Clutch Cover Window 2 - Colour choice Black or Natural - AUD$283.


MPL Ducati Clutch Cover 3 - Colour choice Black, Natural or Red - AUD$283.


MPL Reservoir Covers for Ducati and Aprilia models with threaded clutch top and screw brake. 999 polygonal shape - Colour Black. ROUND COVER - Front Brake & Clutch Reservoir Cover set - AUD$108.
POLYGONAL (749/999 STYLE) - Front Brake & Clutch Reservoir Cover set - AUD$128.
ROUND REAR - Rear Brake Cover - AUD$47.