SP electronics supplies a selection of Quickshifter Motorbike Kits applicable on all single-cylinder 2T/4T carburettor engines. Several variants of the Quickshifer EQS model have been specially designed.

Applicable on all single-cylinder 2T / 4T Carburetor engines. Supplied with a mono-directional COMPRESSION sensor for applications on Tie rod (Tie rod not supplied), suitable for use with standard or reverse shifting depending on the kinematics installed on the vehicle (Push or Pull sensor options).

The kit consists of a single electronic control unit (eBox EQS), an electromechanical sensor to be applied directly on the gear lever and a Plug & Play wiring connecting to the ORIGINAL electrical system of the vehicle. EQS (Easy Quick Shifter) is an electronic device that allows, in the fast sporting use of the vehicle, to engage the upper gear without closing the gas and without using the clutch. It also DOES NOT require any external power supply thanks to a Batteryless Hardware solution that can be applied to all single-cylinder Carburetor engines with Capacitive Discharge (CDI) ignition. The configuration is manual by microswitch selectors, therefore no external device such as PC or SmartPhone is required. The control unit is water-resistant ABS plastic (NOT FOR IMMERSION) and vibrations thanks to the full inside resin coating of the electronic board. Harness and connectors are designed for Motorsport applications, thus making the device resistant to engine temperatures, oil and hydrocarbons as well as water spray even under pressure.

It is possible to configure the only Cut-Off time from 40 to 64 milliseconds with an accuracy of 2 milliseconds through 12 microswitches selectors.

SKU EQSPUSHPULL
Brand Quickshifter Kits
Unit Of Measure 1

Be The First To Review This Product!

Help other Sportsbike users shop smarter by writing reviews for products you have purchased.

Write a product review