Your Current Vehicle:
ITALIAN QUICKSHIFTER ELECTRONICS
SP Electronics
SP Electronics develops motorcycle electronic quickshifter systems designed for fast, precise gear changes across road, race, off-road and supermoto applications.
Sportsbike offers SP Electronics quickshifter kits, shift sensors, control units, plug-and-play wiring and accessories for fuel-injected and carburetted 2-stroke and 4-stroke motorcycles.
Use the Bike Finder above or shop by category to find SP Electronics products compatible with your motorcycle.
Use the Bike Finder above or shop by category to find SP Electronics products compatible with your motorcycle.
Italian-made SP Electronics quickshifter systems for road, race, off-road and supermoto motorcycles.
Shop quickshifter kits, sensors, control units and plug-and-play accessories.
CATEGORY
Explore the range
Shop by Category
SP Electronics FAQs +
What is SP Electronics? +
SP Electronics is a specialist motorcycle-electronics brand with products focused on quickshifter and related performance-electronics applications.
Its systems are designed around motorcycle-specific or configurable sensor and wiring requirements.
Why should I choose SP Electronics? +
SP Electronics is a strong choice for riders looking for a dedicated motorcycle quickshifter solution with multiple sensor and application options.
The range allows the system to be matched to different engines, shift directions and motorcycle configurations.
What does a motorcycle quickshifter do? +
A quickshifter allows clutchless upshifts by momentarily reducing engine load during the gear change.
This can make gear changes faster and reduce the need to close the throttle during acceleration.
Does every SP Electronics quickshifter work on every motorcycle? +
No. Motorcycle type, ignition or injection system, shift arrangement, sensor direction and wiring requirements all affect compatibility.
Choose the exact kit or configuration listed for the motorcycle.
What is the difference between push and pull quickshifter sensors? +
The sensor must match the direction of force in the motorcycle's shift linkage. Depending on the rearset and shift pattern, the linkage may place the sensor in compression or tension during an upshift.
Check the required sensor direction before ordering.
Can SP Electronics be used with aftermarket rearsets? +
Often yes, but the shift-rod layout and sensor direction may change when rearsets or reverse-shift configurations are fitted.
Confirm the mechanical arrangement before choosing the sensor.
Can I install an SP Electronics quickshifter myself? +
Installation can involve electrical connections, sensor positioning and setup of cut time or other parameters.
If you are not experienced with motorcycle wiring and shift-linkage setup, Sportsbike recommends professional installation.
Will a quickshifter damage my gearbox? +
A correctly selected and configured quickshifter is designed to reduce engine load during an upshift, but poor setup, incorrect sensor selection or unsuitable cut settings can cause harsh shifting.
Use the manufacturer's setup instructions for the exact motorcycle.
How long will my SP Electronics order take to arrive? +
Availability varies by kit, sensor and motorcycle-specific configuration.
As a general guide, allow approximately 1–3 weeks subject to current supplier availability.
What warranty applies to SP Electronics products? +
Manufacturer warranty coverage depends on the product and applicable SP Electronics conditions. Correct installation and configuration are important.
Australian Consumer Law rights also apply to eligible purchases from Sportsbike.
GENUINE, AUTHORISED PARTS
Sourced from manufacturers and authorised distributors
REAL FITMENT EXPERTISE
Verified Make, Model & Year fitment data
TRUSTED FOR 30+ YEARS
Australian motorcycle parts specialists
LOCAL AUSTRALIAN SUPPORT
Based in Warrnambool, Victoria
